Vonage Support
 
Support Home » Phone Adapter Login Information
Phone Adapter Login Information

Phone Adapter Login Information

The following table contains the default login information for Vonage devices. Consult the user guide for your Vonage device for specific instructions on how to login.
Device
IP Address
Default User Name
Default Password
Cisco ATA-186
* See instructions below
(blank)
(blank)
D-Link VTA
* See instructions below
user
user
D-Link VWR
http://192.168.15.1
user
user
Linksys PAP2
* See instructions below
admin
admin
Linksys PAP2v2
* See instructions below
admin
admin
Linksys RT31P2
http://192.168.15.1
admin
admin
Linksys RTP300
http://192.168.15.1
admin
admin
Linksys WRT54GP2
http://192.168.15.1
admin
admin
Linksys WRTP54G
http://192.168.15.1
admin
admin
Motorola VT1005
http://192.168.102.1
(blank)
(blank)
Motorola VT2142
http://192.168.15.1
router
router
Motorola VT2442
http://192.168.15.1
router
router
Motorola VT2542
http://192.168.15.1
router
router
Uniden UIP1869V
http://192.168.15.1
admin
admin
V-Tech IP8100
http://192.168.15.1
VTech
VTech
Instructions for retrieving your IP address from Vonage stand alone telephone adapters (without a built-in router)
By Default, Vonage stand alone telephone adapters receive the IP address from the router they are connected to. Therefore, this IP address may change.
Cisco ATA-186
To obtain the IP address of the Cisco ATA-186, perform the following steps:
  1. Pick up the phone connected to the Phone1 port of the Cisco ATA-186.
  2. The button on the device will turn red.
  3. Press the button. The IVR (Interactive Voice Response) will respond with the configuration menu.
  4. Dial 80#
  5. The IVR will respond with the IP address.
D-Link VTA
To obtain the IP address of the D-Link VTA, perform the following steps:
  1. Pick up the phone connected to the Phone1 port of the D-Link VTA. This must be a phone that supports Caller-ID.
  2. Dial *11
  3. The IP address will appear on the Caller-ID display.
Linksys PAP2 / PAP2v2
To obtain the IP address of the Linksys PAP2 or PAP2v2, perform the following steps:
  1. Pick up the phone connected to the Phone1 port of the Linksys device.
  2. Dial ****. The IVR (Interactive Voice Response) will respond with the configuration menu.
  3. Dial 110#
  4. The IVR will respond with the IP address.
en_ca/1155

 

Did this article help you?

Yes, the problem is solved!
Yes, but the instructions were unclear.
Yes, but it was not the answer I was hoping for.
No, it did not address my particular situation.
No, I will have to call customer service.

Related Articles