Vonage Support
 
Support Home » Do I need to do anything to adjust for Daylight Savings Time?
Do I need to do anything to adjust for Daylight Savings Time?

Do I need to do anything to adjust for Daylight Savings Time?


UTStarcom F1000

If you are using the UTStarcom F1000 WiFi phone you will need to make an adjustment for Daylight Savings Time.
To adjust the UTStarcom F1000 for Daylight Savings Time perform the following:
On the handset, select MENU. Scroll down to select TOOLS. Scroll down again and select DST SETTING and toggle on/off to adjust current settings.


Vonage Talk / X-Pro Softphone

Vonage Talk and the X-Pro Softphone do not require any changes to adjust for Daylight Savings Time. They use an internal time protocol. This protocol relies on the PC's time. When your PC is adjusted for DST, it will automatically be reflected in the application.
NOTE: Please make sure your PC has all current operating system upgrades.


Uniden UIP1869V

If you are using a Uniden UIP1869V, you will need to update the time on your device. You can do it either from the base station or the handset. There is no need to set it on both.
To update the time on the base on the Uniden UIP1869V perform the following:
On the base station, press the Menu button. Scroll down and select Global Setup. Select Day & Time. Enter the updated information. Select Save.
To update the time on the handset on the Uniden UIP1869V perform the following:
From the handset, press the joystick. Select the System Setup option. Select Global and then Day & Time. Using the joystick, adjust the time. (You will need to navigate to the hour by moving the joystick once to the right and setting the hour back by moving the joystick once downward.) Press the joystick to Save.

You do not need to make any changes to adjust for Daylight Savings Time for the following devices:

  • Cisco ATA-186
  • Linksys PAP2
  • Linksys PAP2v2
  • D-Link VTA
  • Motorola VT1005
  • Linksys RT31P2
  • Linksys RTP300
  • Motorola VT2442
  • Motorola VT2142
  • Linksys WRT54GP2
  • Linksys WRTP54G
  • D-Link VWR
  • VTech IP8100
Your device will automatically adjust to Daylight Savings Time.
NOTE: If your device does not adjust automatically, unplug your Vonage device, wait 10 seconds and plug it in again.

en_ca/1246

 

Did this article help you?

Yes, the problem is solved!
Yes, but the instructions were unclear.
Yes, but it was not the answer I was hoping for.
No, it did not address my particular situation.
No, I will have to call customer service.

Related Articles